Adjustable Stilts

Carefully read for assembly and use, it is essential for your product

ASSEMBLY

1. Loosen the tube clamps.
2. Insert the lower spring leg tubes upwards through the bottom of the tube clamps
3. Attach the lower spring leg tubes to the interlock bracket. Connect with the provided bolt and nylon lock nut. Tighten securely
4. Slide the upper spring leg tubes down over the lower spring leg tubes and through the tube clamps Position so that the leg strap is just above the larger part of the calf
5. Place the tube clamps into the slots of the clamp brackets, depending on your calf size, so that the stilts remain upright when assembled and tighten securely
6. Attach the heel brackets to the footplates

PRECAUTIONS DURING USE

STRAP FASTENING

• The six holes in the footplate are used to adjust the distance between the footplate and the heel bracket
• Please fasten the leg straps first, and then fasten the foot arch
• Please loosen the foot straps before the leg straps

FORWARD/BACKWARD BALANCE

• If stilts lean forward, loosen the tube clamps and turn the leg straps and support tubes backwards and tighten the clamps. This adjustment is intended to ensure proper forward and backward balance.
• The balance of stilts is controlled by the middle part of the entire spring structure. Any unnatural forward or backward movement will disrupt the balance. Never bend the leg straps
• If your body leans forward when using the stilts, adjust the spring adjuster on the lower coil spring While, whereas if your body leans backwards, the spring adjuster should be adjusted on the upper coil spring
• The clamp brackets next to the tube clamps are used to keep the poles balanced

HEIGHT ADJUSTMENT

• Place the side pole holder in the slots of the side pole brackets according to your calf size. So that the stilts remain upright when assembled
• Remove wing bolts. Raise the pole legs evenly to the desired height, align the wing holes in the legs and extension tubes, install wing bolts, and tighten them securely